Date   

Re: Contour integral symbol not displaying in equations #mathjax

Delmar Larsen <dlarsen@...>
 

We will define the \oiiint code. So just use that for now and we can handle the specific code behind the scenes.


Re: Forcing equations to number

Delmar Larsen <dlarsen@...>
 

To use mathjax, you need to put the entire sentence into mathjax to get an automatic equation number.


Re: Forcing equations to number

Josh Halpern
 

I want to go the otherway, adding numbers to some lines with text. 

Josh

On Mon, Aug 3, 2020 at 9:48 PM Delmar Larsen via groups.io <dlarsen=libretexts.org@groups.io> wrote:
There are two modes for equations on the LibreTexts (and mathjax / latex in general): inline and display. 

Inline equations are designated with \( and \) delimiters and are a meant for being embedded in text. As such, they do not have equations numbers associated with them.
Display equation are designated with \[ and \] delimiters and are means to take up a full line by themselves (i.e., no text before or after). BY default, the LibreTexts adds an equation number based off of the the number in the title of the page (if no number, then just starting from one). This can be removed by adding the \nonumber or \notag code in the equation.


Re: Forcing equations to number

Delmar Larsen <dlarsen@...>
 

There are two modes for equations on the LibreTexts (and mathjax / latex in general): inline and display. 

Inline equations are designated with \( and \) delimiters and are a meant for being embedded in text. As such, they do not have equations numbers associated with them.
Display equation are designated with \[ and \] delimiters and are means to take up a full line by themselves (i.e., no text before or after). BY default, the LibreTexts adds an equation number based off of the the number in the title of the page (if no number, then just starting from one). This can be removed by adding the \nonumber or \notag code in the equation.


Forcing equations to number

Josh Halpern
 

Hi,

I have a text with a number of lines that contain formulas at the end and I want them to number
For example

This is a line with some mathjax \(  X \)

and I want this equation at the end to autonumber

Looking for help

Josh Halpern


Re: Contour integral symbol not displaying in equations #mathjax

Josh Halpern
 

\int\hspace{-2ex}\int\hspace{-3ex}\bigcirc~  works. You have to back space to maintain distances

Best
Josh Halpern

On Mon, Aug 3, 2020 at 3:16 PM smmuller via groups.io <smmuller=ucdavis.edu@groups.io> wrote:
Based on these stackexchange posts (here, and here), it looks like you would have to install a separate package to support those. I have no idea how you would do that, but I know that Libretexts added the mhchem extension so it's probably possible.
One workaround would be to just copy paste the unicode symbols for them (∯, ∰) into the equation - that's working for me in Libretexts.

0.5 ∯_{\mathrm{A}} \overline{\mathrm{\underline{S}}} \bullet \hat{n} \mathrm{da}+∰_{\mathrm{V}}\left[\left\langle\mathrm{P}_{\mathrm{d}}(\mathrm{t})\right\rangle+2 \mathrm{j} \omega\left(\mathrm{W}_{\mathrm{m}}-\mathrm{W}_{\mathrm{e}}\right)\right] \mathrm{d} \mathrm{v}=0


Re: Contour integral symbol not displaying in equations #mathjax

smmuller@...
 

Based on these stackexchange posts (here, and here), it looks like you would have to install a separate package to support those. I have no idea how you would do that, but I know that Libretexts added the mhchem extension so it's probably possible.
One workaround would be to just copy paste the unicode symbols for them (∯, ∰) into the equation - that's working for me in Libretexts.

0.5 ∯_{\mathrm{A}} \overline{\mathrm{\underline{S}}} \bullet \hat{n} \mathrm{da}+∰_{\mathrm{V}}\left[\left\langle\mathrm{P}_{\mathrm{d}}(\mathrm{t})\right\rangle+2 \mathrm{j} \omega\left(\mathrm{W}_{\mathrm{m}}-\mathrm{W}_{\mathrm{e}}\right)\right] \mathrm{d} \mathrm{v}=0


Re: Adding a google maps attachment

Jasmine Keane
 

Ah ok, thank you so much! I'll give that a go


Re: Adding a google maps attachment

smmuller@...
 

Hi Jasmine,
In Google Maps, after you find your location, click Share, then the Embed a Map tab, and copy the HTML.
Once you're in Libretexts and editing your page, in the top menu click View, and then Source, and paste the map's HTML where you want it.
Click View and Source again, and your map should be there on the page.
(If you really don't want to work with the page source, you can cheat instead - in the top menu click Elements, then Video. Click the Embed tab, paste in the HTML you copied from Google Maps, and click Insert Video. It will insert your map there.)


Adding a google maps attachment

Jasmine Keane
 

Hi everyone,
i am trying to add a google maps feature to a project I am working on. Its a specific location but I cant figure out how to add it currently.

Thanks,
Jasmine Keane


Contour integral symbol not displaying in equations #mathjax

Sadia Mahtaban
 

The contour integral symbol does not display when used in equations. The Latex code shows correct when using Mathpix, but on the Libretext page, double and triple contour integrals do not display the symbols. The code and page pics are attached.
Link to page

0.5 \oiint_{\mathrm{A}} \overline{\mathrm{\underline S}} \bullet \hat{n} \mathrm{da}+\oiiint_{\mathrm{V}}\left[\left\langle\mathrm{P}_{\mathrm{d}}(\mathrm{t})\right\rangle+2 \mathrm{j} \omega\left(\mathrm{W}_{\mathrm{m}}-\mathrm{W}_{\mathrm{e}}\right)\right] \mathrm{d} \mathrm{v}=0



Thank you,
Sadia


Re: #remix Images missing from remix across libraries #remix

Kevin Gilmore
 

Thanks for the assistance, Josh. I'll watch for this as I continue to work going forward. 
Best,
-Kevin

--

Kevin Gilmore
Civil & Environmental Engineering
Bucknell University


Re: #Formatting #referencing #Formatting #referencing

smmuller@...
 

On Fri, Jul 17, 2020 at 03:03 PM, <blindsh@...> wrote:
phytate
For the first page, it looks like the pathways are formatted as a definition list. The easiest way to fix it would be to just get rid of that - highlight the list, go to Elements, and click Definition List, and it should remove that formatting. (Unless you're asking how to edit the HTML/CSS/whatever controls that behavior?)

For the second page, you could try removing the http:// part of the link so you just have something like this:

upload.wikimedia.org/wikipedia/commons/b/b0/Kidney_section.jpg

For the third page, it looks like those words are formatted as headings. There's a heading section in the toolbar you can use to change them back to normal text, if you don't mind doing that manually for each word. (Unless you're asking how to change the heading formatting so it looks different?)

For the last question, do you have a page with an example?


Re: #remix Images missing from remix across libraries #remix

Josh Halpern
 

So I copied the book into my sandbox and modified it there


You should be able to see and modify it here. I can either change your text or simply move what is in my sandbox to the shell
Best
Josh Halpern 


On Fri, Jul 17, 2020 at 5:05 PM Mark Baillie <mtbaillie@...> wrote:
Thanks for looking in to this. We intentionally had the first two chapters without any pages within them. They are sort of landing pages. We would have just used pages for them, but they don’t show up in the layout with chapters. Is that not possible to have chapters that are content?

Maybe the answer is yes - can you do it and I can learn from what you do and see if it works?

Mark Baillie, Ph.D.
Department of Chemistry, Assistant Professor
https://ualr.edu/chemistry/ 
STEM Education Center, STRIVE Program Director
https://ualr.edu/strive/
University of Arkansas at Little Rock
501-301-4695



On Jul 17, 2020, at 3:54 PM, Josh Halpern via groups.io <jhalpern@...> wrote:

Sorry about that, it was not right. The problem was that there are chapters without pages 1. About MoSI and 2 People. If you remix so that there is a chapter 1. About MoSI and it has two pages 1.1 About MoDI and 1.2 people, then it works. I can do it for you if you wish

Best
Josh Halpern

On Fri, Jul 17, 2020 at 4:27 PM Joshua Halpern <jhalpern@...> wrote:
Hi,  I think I found the issue

To change that, 

Goto (old FORTRAN programmer) Page Setting in

and select detailed for the category listing display (the radio button right under the icon (you should compess your icons a bit for a better display . Took the liberty of doing that


Best
Josh Halpern 

On Fri, Jul 17, 2020 at 3:48 PM Mark Baillie <mtbaillie@...> wrote:
I’ll also tag on to your thread here about Remixer challenges (I hope thats ok). 

When I remixed from this page:

I ended up with a clone that doesn’t show the chapters on the main page unless I am logged in with my personal account.

Any idea why that is? Almost seems like a privelidge access issue, but I haven’t put any restriction on the page.

Also, even when I do see the chapter pages (when logged in to my account), the chapters don’t show the pages within the chapters from the book view. Here is the original page that I remixed from (see red circles for the preview of what’s inside the chapter): 
<Screen Shot 2020-07-17 at 1.02.38 PM.png>

And the remixed page when logged in:
<Screen Shot 2020-07-17 at 1.01.30 PM.png>

Is there a preference to turn on to get the chapter squares to show the preview of what pages are within the chapter?


Mark Baillie, Ph.D.
Department of Chemistry, Assistant Professor
https://ualr.edu/chemistry/ 
STEM Education Center, STRIVE Program Director
https://ualr.edu/strive/
University of Arkansas at Little Rock
501-301-4695



On Jul 17, 2020, at 12:39 PM, Kevin Gilmore <kg021@...> wrote:

I am a new user and am working my way through the Construction Guide. After putting together a partial remix map for a course, I created a new remix and pushed it into my sandbox as a Course Shell to see how the initial sections were taking shape. But, many of the images are not showing up. Here is the link for the shell...

https://eng.libretexts.org/Sandboxes/kg021@.../CEEG_445_Course_Shell_test

...and here is an example of where the images are not showing up. 

https://eng.libretexts.org/Sandboxes/kg021@.../CEEG_445_Course_Shell_test/01%3A_Chemistry_Basics/1.03%3A_Forces_between_Molecules

If you have suggestions I would appreciate it. Also, my account is created in the Engineering library, but I hope to pull most of the material for this shell from the Chemistry library. It looks like I should have no problems reaching across libraries as long as I continue to reload the New Remix map that I started on. However, if there are reasons I should locate my account/sandbox/shells in the Chemistry library instead, that would probably be good to know now. 
Thanks!

-- 

Kevin Gilmore
Civil & Environmental Engineering
Bucknell University





Re: #remix Images missing from remix across libraries #remix

Mark Baillie
 

I can see that you made the clone show the preview of the pages within the chapters now. Thank you! However, when I take the page and paste the url in an incognito tab (not logged in), I don’t see any of the showorg! Any idea why that is limited to me as a user?

Mark Baillie, Ph.D.
Department of Chemistry, Assistant Professor
https://ualr.edu/chemistry/ 
STEM Education Center, STRIVE Program Director
https://ualr.edu/strive/
University of Arkansas at Little Rock
501-301-4695



On Jul 17, 2020, at 4:05 PM, Mark Baillie via groups.io <mtbaillie@...> wrote:

Thanks for looking in to this. We intentionally had the first two chapters without any pages within them. They are sort of landing pages. We would have just used pages for them, but they don’t show up in the layout with chapters. Is that not possible to have chapters that are content?

Maybe the answer is yes - can you do it and I can learn from what you do and see if it works?

Mark Baillie, Ph.D.
Department of Chemistry, Assistant Professor
https://ualr.edu/chemistry/ 
STEM Education Center, STRIVE Program Director
https://ualr.edu/strive/
University of Arkansas at Little Rock
501-301-4695



On Jul 17, 2020, at 3:54 PM, Josh Halpern via groups.io <jhalpern@...> wrote:

Sorry about that, it was not right. The problem was that there are chapters without pages 1. About MoSI and 2 People. If you remix so that there is a chapter 1. About MoSI and it has two pages 1.1 About MoDI and 1.2 people, then it works. I can do it for you if you wish

Best
Josh Halpern

On Fri, Jul 17, 2020 at 4:27 PM Joshua Halpern <jhalpern@...> wrote:
Hi,  I think I found the issue

To change that, 

Goto (old FORTRAN programmer) Page Setting in

and select detailed for the category listing display (the radio button right under the icon (you should compess your icons a bit for a better display . Took the liberty of doing that


Best
Josh Halpern 

On Fri, Jul 17, 2020 at 3:48 PM Mark Baillie <mtbaillie@...> wrote:
I’ll also tag on to your thread here about Remixer challenges (I hope thats ok). 

When I remixed from this page:

I ended up with a clone that doesn’t show the chapters on the main page unless I am logged in with my personal account.

Any idea why that is? Almost seems like a privelidge access issue, but I haven’t put any restriction on the page.

Also, even when I do see the chapter pages (when logged in to my account), the chapters don’t show the pages within the chapters from the book view. Here is the original page that I remixed from (see red circles for the preview of what’s inside the chapter): 
<Screen Shot 2020-07-17 at 1.02.38 PM.png>

And the remixed page when logged in:
<Screen Shot 2020-07-17 at 1.01.30 PM.png>

Is there a preference to turn on to get the chapter squares to show the preview of what pages are within the chapter?


Mark Baillie, Ph.D.
Department of Chemistry, Assistant Professor
https://ualr.edu/chemistry/ 
STEM Education Center, STRIVE Program Director
https://ualr.edu/strive/
University of Arkansas at Little Rock
501-301-4695



On Jul 17, 2020, at 12:39 PM, Kevin Gilmore <kg021@...> wrote:

I am a new user and am working my way through the Construction Guide. After putting together a partial remix map for a course, I created a new remix and pushed it into my sandbox as a Course Shell to see how the initial sections were taking shape. But, many of the images are not showing up. Here is the link for the shell...

https://eng.libretexts.org/Sandboxes/kg021@.../CEEG_445_Course_Shell_test

...and here is an example of where the images are not showing up. 

https://eng.libretexts.org/Sandboxes/kg021@.../CEEG_445_Course_Shell_test/01%3A_Chemistry_Basics/1.03%3A_Forces_between_Molecules

If you have suggestions I would appreciate it. Also, my account is created in the Engineering library, but I hope to pull most of the material for this shell from the Chemistry library. It looks like I should have no problems reaching across libraries as long as I continue to reload the New Remix map that I started on. However, if there are reasons I should locate my account/sandbox/shells in the Chemistry library instead, that would probably be good to know now. 
Thanks!

-- 

Kevin Gilmore
Civil & Environmental Engineering
Bucknell University






#Formatting #referencing #Formatting #referencing

blindsh@...
 

After working on my resource the past couple of days I have some small formatting questions.

I want to make the carbohydrate pathways at the top of this page not appear when clicked like they are now, but don't know/understand how these are formatted correctly.

 

https://med.libretexts.org/Courses/Kansas_State_University/Book%3A_Human_Nutrition_(Lindshield)/06%3A_Macronutrient_and_Alcohol_Metabolism/6.02%3A_Carbohydrate_Metabolism

I have a number of references where the hyperlinks can't be unlinked for some reasons. Here is an example.

 

 

https://med.libretexts.org/Courses/Kansas_State_University/Book%3A_Human_Nutrition_(Lindshield)/06%3A_Macronutrient_and_Alcohol_Metabolism/6.04%3A_Protein_Metabolism

Why are phytate, polyphenols and oxalate blue on this page? How to I normalize this to be consistent with formatting found throughout the resource.

 

 

https://med.libretexts.org/Courses/Kansas_State_University/Book%3A_Human_Nutrition_(Lindshield)/12%3A_Blood%2C_Bones_and_Teeth_Micronutrients/12.08%3A_Zinc

I noticed while cleaning up some references, that the number reference hyperlinks on some pages were to anchored references on some pages and just to the reference section on others. What is the difference between these options? Does the fact that this formatting is different on pages matter?

Thanks for the assistance.

 


Re: #remix Images missing from remix across libraries #remix

Mark Baillie
 

Thanks for looking in to this. We intentionally had the first two chapters without any pages within them. They are sort of landing pages. We would have just used pages for them, but they don’t show up in the layout with chapters. Is that not possible to have chapters that are content?

Maybe the answer is yes - can you do it and I can learn from what you do and see if it works?

Mark Baillie, Ph.D.
Department of Chemistry, Assistant Professor
https://ualr.edu/chemistry/ 
STEM Education Center, STRIVE Program Director
https://ualr.edu/strive/
University of Arkansas at Little Rock
501-301-4695



On Jul 17, 2020, at 3:54 PM, Josh Halpern via groups.io <jhalpern@...> wrote:

Sorry about that, it was not right. The problem was that there are chapters without pages 1. About MoSI and 2 People. If you remix so that there is a chapter 1. About MoSI and it has two pages 1.1 About MoDI and 1.2 people, then it works. I can do it for you if you wish

Best
Josh Halpern

On Fri, Jul 17, 2020 at 4:27 PM Joshua Halpern <jhalpern@...> wrote:
Hi,  I think I found the issue

To change that, 

Goto (old FORTRAN programmer) Page Setting in

and select detailed for the category listing display (the radio button right under the icon (you should compess your icons a bit for a better display . Took the liberty of doing that


Best
Josh Halpern 

On Fri, Jul 17, 2020 at 3:48 PM Mark Baillie <mtbaillie@...> wrote:
I’ll also tag on to your thread here about Remixer challenges (I hope thats ok). 

When I remixed from this page:

I ended up with a clone that doesn’t show the chapters on the main page unless I am logged in with my personal account.

Any idea why that is? Almost seems like a privelidge access issue, but I haven’t put any restriction on the page.

Also, even when I do see the chapter pages (when logged in to my account), the chapters don’t show the pages within the chapters from the book view. Here is the original page that I remixed from (see red circles for the preview of what’s inside the chapter): 
<Screen Shot 2020-07-17 at 1.02.38 PM.png>

And the remixed page when logged in:
<Screen Shot 2020-07-17 at 1.01.30 PM.png>

Is there a preference to turn on to get the chapter squares to show the preview of what pages are within the chapter?


Mark Baillie, Ph.D.
Department of Chemistry, Assistant Professor
https://ualr.edu/chemistry/ 
STEM Education Center, STRIVE Program Director
https://ualr.edu/strive/
University of Arkansas at Little Rock
501-301-4695



On Jul 17, 2020, at 12:39 PM, Kevin Gilmore <kg021@...> wrote:

I am a new user and am working my way through the Construction Guide. After putting together a partial remix map for a course, I created a new remix and pushed it into my sandbox as a Course Shell to see how the initial sections were taking shape. But, many of the images are not showing up. Here is the link for the shell...

https://eng.libretexts.org/Sandboxes/kg021@.../CEEG_445_Course_Shell_test

...and here is an example of where the images are not showing up. 

https://eng.libretexts.org/Sandboxes/kg021@.../CEEG_445_Course_Shell_test/01%3A_Chemistry_Basics/1.03%3A_Forces_between_Molecules

If you have suggestions I would appreciate it. Also, my account is created in the Engineering library, but I hope to pull most of the material for this shell from the Chemistry library. It looks like I should have no problems reaching across libraries as long as I continue to reload the New Remix map that I started on. However, if there are reasons I should locate my account/sandbox/shells in the Chemistry library instead, that would probably be good to know now. 
Thanks!

-- 

Kevin Gilmore
Civil & Environmental Engineering
Bucknell University





Re: #remix Images missing from remix across libraries #remix

Josh Halpern
 

Sorry about that, it was not right. The problem was that there are chapters without pages 1. About MoSI and 2 People. If you remix so that there is a chapter 1. About MoSI and it has two pages 1.1 About MoDI and 1.2 people, then it works. I can do it for you if you wish

Best
Josh Halpern

On Fri, Jul 17, 2020 at 4:27 PM Joshua Halpern <jhalpern@...> wrote:
Hi,  I think I found the issue

To change that, 

Goto (old FORTRAN programmer) Page Setting in

and select detailed for the category listing display (the radio button right under the icon (you should compess your icons a bit for a better display . Took the liberty of doing that


Best
Josh Halpern 

On Fri, Jul 17, 2020 at 3:48 PM Mark Baillie <mtbaillie@...> wrote:
I’ll also tag on to your thread here about Remixer challenges (I hope thats ok). 

When I remixed from this page:

I ended up with a clone that doesn’t show the chapters on the main page unless I am logged in with my personal account.

Any idea why that is? Almost seems like a privelidge access issue, but I haven’t put any restriction on the page.

Also, even when I do see the chapter pages (when logged in to my account), the chapters don’t show the pages within the chapters from the book view. Here is the original page that I remixed from (see red circles for the preview of what’s inside the chapter): 

And the remixed page when logged in:

Is there a preference to turn on to get the chapter squares to show the preview of what pages are within the chapter?


Mark Baillie, Ph.D.
Department of Chemistry, Assistant Professor
https://ualr.edu/chemistry/ 
STEM Education Center, STRIVE Program Director
https://ualr.edu/strive/
University of Arkansas at Little Rock
501-301-4695



On Jul 17, 2020, at 12:39 PM, Kevin Gilmore <kg021@...> wrote:

I am a new user and am working my way through the Construction Guide. After putting together a partial remix map for a course, I created a new remix and pushed it into my sandbox as a Course Shell to see how the initial sections were taking shape. But, many of the images are not showing up. Here is the link for the shell...

https://eng.libretexts.org/Sandboxes/kg021@.../CEEG_445_Course_Shell_test

...and here is an example of where the images are not showing up.

https://eng.libretexts.org/Sandboxes/kg021@.../CEEG_445_Course_Shell_test/01%3A_Chemistry_Basics/1.03%3A_Forces_between_Molecules

If you have suggestions I would appreciate it. Also, my account is created in the Engineering library, but I hope to pull most of the material for this shell from the Chemistry library. It looks like I should have no problems reaching across libraries as long as I continue to reload the New Remix map that I started on. However, if there are reasons I should locate my account/sandbox/shells in the Chemistry library instead, that would probably be good to know now.
Thanks!

--

Kevin Gilmore
Civil & Environmental Engineering
Bucknell University


Re: #remix Images missing from remix across libraries #remix

Josh Halpern
 

Hi,  I think I found the issue

To change that, 

Goto (old FORTRAN programmer) Page Setting in

and select detailed for the category listing display (the radio button right under the icon (you should compess your icons a bit for a better display . Took the liberty of doing that


Best
Josh Halpern 

On Fri, Jul 17, 2020 at 3:48 PM Mark Baillie <mtbaillie@...> wrote:
I’ll also tag on to your thread here about Remixer challenges (I hope thats ok). 

When I remixed from this page:

I ended up with a clone that doesn’t show the chapters on the main page unless I am logged in with my personal account.

Any idea why that is? Almost seems like a privelidge access issue, but I haven’t put any restriction on the page.

Also, even when I do see the chapter pages (when logged in to my account), the chapters don’t show the pages within the chapters from the book view. Here is the original page that I remixed from (see red circles for the preview of what’s inside the chapter): 

And the remixed page when logged in:

Is there a preference to turn on to get the chapter squares to show the preview of what pages are within the chapter?


Mark Baillie, Ph.D.
Department of Chemistry, Assistant Professor
https://ualr.edu/chemistry/ 
STEM Education Center, STRIVE Program Director
https://ualr.edu/strive/
University of Arkansas at Little Rock
501-301-4695



On Jul 17, 2020, at 12:39 PM, Kevin Gilmore <kg021@...> wrote:

I am a new user and am working my way through the Construction Guide. After putting together a partial remix map for a course, I created a new remix and pushed it into my sandbox as a Course Shell to see how the initial sections were taking shape. But, many of the images are not showing up. Here is the link for the shell...

https://eng.libretexts.org/Sandboxes/kg021@.../CEEG_445_Course_Shell_test

...and here is an example of where the images are not showing up.

https://eng.libretexts.org/Sandboxes/kg021@.../CEEG_445_Course_Shell_test/01%3A_Chemistry_Basics/1.03%3A_Forces_between_Molecules

If you have suggestions I would appreciate it. Also, my account is created in the Engineering library, but I hope to pull most of the material for this shell from the Chemistry library. It looks like I should have no problems reaching across libraries as long as I continue to reload the New Remix map that I started on. However, if there are reasons I should locate my account/sandbox/shells in the Chemistry library instead, that would probably be good to know now.
Thanks!

--

Kevin Gilmore
Civil & Environmental Engineering
Bucknell University


Re: #remix Images missing from remix across libraries #remix

Josh Halpern
 

The problem is that the figures were hotlinks to a wikibooks page that has disappeared. I found one of the two figures and will get the second as well as prettify, but I am in the workshop meetings so it will take a couple of hours (should be done today). The one that I fixed is now an image file in the Mindtouch system and I will take care of the second one on that page later and work my way through. You took the pages from a relatively old LibreTexts, which we had not gone back to and eliminated this issue.

Best
Josh Halpern

On Fri, Jul 17, 2020 at 1:39 PM Kevin Gilmore <kg021@...> wrote:
I am a new user and am working my way through the Construction Guide. After putting together a partial remix map for a course, I created a new remix and pushed it into my sandbox as a Course Shell to see how the initial sections were taking shape. But, many of the images are not showing up. Here is the link for the shell...

https://eng.libretexts.org/Sandboxes/kg021@.../CEEG_445_Course_Shell_test

...and here is an example of where the images are not showing up.

https://eng.libretexts.org/Sandboxes/kg021@.../CEEG_445_Course_Shell_test/01%3A_Chemistry_Basics/1.03%3A_Forces_between_Molecules

If you have suggestions I would appreciate it. Also, my account is created in the Engineering library, but I hope to pull most of the material for this shell from the Chemistry library. It looks like I should have no problems reaching across libraries as long as I continue to reload the New Remix map that I started on. However, if there are reasons I should locate my account/sandbox/shells in the Chemistry library instead, that would probably be good to know now.
Thanks!

--

Kevin Gilmore
Civil & Environmental Engineering
Bucknell University

401 - 420 of 792